UL 1332 FEP Wire for UAE B2B Wholesale Sourcing
UL AWM Style 1332 is a single conductor with covering, rated 200°C and 300 Vac with Horizontal Flame. The conductor range is 30 AWG through 10 AWG, solid or stranded round, with extruded FEP insulation at 13 mils minimum average and 12 mils minimum at any point.
This page serves UAE B2B wholesale sourcing: electrical-component distributors, appliance and equipment OEM buyers, sourcing teams placing repeat production quantities, and buyers who need a controlled Style 1332 specification rather than a general enquiry.
Wholesale here means bulk sourcing, distributor purchasing, production procurement and repeat commercial RFQs. It does not mean a published price schedule or fixed quantity policy.
The official Use is internal wiring of appliances. Regional positioning does not alter it — a UAE distributor may source Style 1332 for an OEM customer, and the final application still has to conform to that Use and to the applicable equipment specification.
Verified UL Style 1332 Specification
| Parameter | Style-level information |
|---|---|
| UL AWM Style | 1332 |
| Product description | Single Conductor with Covering |
| Temperature rating | 200°C |
| Normal voltage rating | 300 Vac |
| Flame | Horizontal Flame |
| Optional rating | Oil Resistant 80°C |
| Optional rating | Gasoline Resistant |
| Style conductor range | 30 AWG–10 AWG |
| Conductor form | Solid or Stranded Round |
| Insulation | Extruded FEP |
| Insulation thickness | 13 mil minimum average / 12 mil minimum at any point |
| Optional covering | Extruded FEP, 2 mil or heavier or glass braid, 7 mil or heavier |
| Marking | General |
| Official Use | Internal wiring of appliances |
| Optional tag information | Suitable for immersion in gasoline; gasoline vapor; 80°C in oil; and/or 600 volts peak for electronic use only, where applicable to the ordered construction |
Eight clarifications belong with that table. 30–10 AWG is the Style range and not guaranteed inventory. The 13/12 mil requirement applies across that whole verified range. The optional covering is separate from the base FEP insulation. Oil resistance is optional. Gasoline resistance is optional. The additional tag statements are not universal. 600 volts peak is not the normal Style voltage rating. And conductor material and plating are not universally specified at Style level.
One Insulation Requirement Across the Range
The FEP insulation requirement is 13 mils minimum average with 12 mils minimum at any point, and it applies to the verified 30 AWG–10 AWG Style range as a whole.
Style 1332 is not split here into a 30–16 AWG group and a separate larger-size group. No such division exists in the verified data, and a 30 AWG construction and a 10 AWG construction carry the same insulation requirement.
The two figures are separate requirements rather than a range. The first governs the average across the wall; the second sets a floor at every individual point on it. Neither is a nominal value, and neither establishes a finished outside diameter.
Insulation and Covering Are Two Different Fields
The product description is single conductor with covering, and the Style keeps the two construction elements distinct.
Base insulation: extruded FEP, 13 mils minimum average, 12 mils minimum at any point.
Optional covering: extruded FEP at 2 mils or heavier, or glass braid at 7 mils or heavier.
Two points follow. The covering options are alternatives — the Style states one or the other, not both applied together. And the covering thickness is not added to the insulation requirement to produce a single universal wall figure, nor is a finished OD calculated from the combination.
Not every Style 1332 order includes a second FEP layer or a glass braid. Where covering matters to the design, the buyer specifies the required qualified construction. No glass-fibre type, braid density, braid treatment, braid coating, braid colour or mechanical-performance improvement is stated here, because the Style record establishes none.
200°C and 300 Vac
The verified temperature rating is 200°C. It is stated here without a continuity qualifier — not 200°C continuous service, not continuous-duty, not long-term 200°C service — because the Style record states 200°C and nothing further. No lower temperature limit is published either; no minimum operating temperature appears in the verified data.
The verified normal voltage rating is 300 Vac, used accurately in technical sections. Style 1332 is not described as 300/600V, 600V wire, 600 Vac, 600 Vdc or 300V AC/DC.
The Optional Tag Statements
The Style permits tag information indicating suitability for immersion in gasoline, gasoline vapor, 80°C in oil, and/or 600 volts peak for electronic use only.
These are applicable optional tag statements rather than universal properties of every ordered construction, and no Style 1332 wire is presented here as automatically carrying all of them.
The 600 volts peak statement deserves particular care. It is not the normal Style voltage rating, which remains 300 Vac. Wherever it appears, the complete limitation — 600 volts peak for electronic use only — stays intact. It is not written as 600V rated, 600 Vac, 600V continuous, a 600V working voltage or 600V electronic wire, and neither “peak” nor “for electronic use only” is dropped. It also does not expand the official Use.
Optional Oil Resistance and Gasoline Resistance
Oil Resistant 80°C. An optional Style rating whose optional status stays explicit. Not all Style 1332 constructions carry it, and the rating is at 80°C — it is not read as oil resistance at the Style temperature of 200°C.
Gasoline Resistant. Also optional, and not expanded here into universal hydrocarbon resistance, all-fuel resistance, petrochemical resistance or a chemical-proof characterisation.
Where either is required, it is specified in the RFQ and confirmed for the ordered construction.
What the FEP Material Name Does Not Supply
The verified insulation is extruded FEP. The material is identified accurately, and no product-level performance is built on top of that identification.
No surface finish is published — the Style defines no required gloss level, surface roughness or visual characteristic — and no non-stick property, low-friction routing, easy-pulling behaviour or smooth-routing benefit is claimed.
No universal chemical resistance is claimed either. Excellent chemical resistance, chemical inertness, resistance to cleaning chemicals and resistance to petrochemical environments are not presented as certified Style parameters. The only chemical-related information the Style provides is the two optional ratings above, plus the applicable tag statements, and those are not converted into general chemical resistance.
Where a buyer requires chemical compatibility, the useful inputs are the chemical, the concentration, the temperature, the exposure method, the duration and the customer’s material requirement. The actual ordered construction can then be evaluated against them.
Conductor Material, Plating and Stranding
The Style establishes the conductor size range and the solid or stranded round form. It establishes nothing else about the conductor.
Copper, tinned copper, bare copper, silver-plated copper and nickel-plated copper are none of them universally defined by Style 1332, and no strand count, strand diameter, lay length or conductor resistance is stated here. This page therefore does not present the product as stranded tinned copper, and it does not offer silver plating as universally available on request.
Conductor material, conductor plating or finish, and detailed strand construction are RFQ fields confirmed against the applicable qualified construction. The Style is also not characterised as fine-stranded, high-flex, extra-flexible or to any strand class, since no such data is established.
Horizontal Flame
The verified Style flame designation is Horizontal Flame. VW-1, FT1, vertical flame, flameproof and fire-resistant characterisations are not claimed here, and any additional flame requirement depends on separate confirmation for the ordered construction.
Internal Wiring of Appliances Is the Use
The formal UL Use is internal wiring of appliances, and that wording is used exactly.
It is not broadened here into building wiring, field wiring, control-cabinet field wiring, facility instrumentation wiring, branch circuits, tray wiring, conduit wiring, external sensor or signal cables, or power distribution.
One boundary is worth stating specifically because of how Style 1332 is sometimes searched for: it is a single-conductor AWM construction, and it does not by itself define a thermocouple alloy, a thermocouple extension grade, a paired thermocouple cable or an instrument cable. Those are different product categories with their own requirements.
Where a buyer’s approved equipment specification requires Style 1332 for internal wiring within a product, that requirement is evaluated on its own terms against the drawing and the qualified construction.
Style Range Is Not Inventory
30 AWG through 10 AWG is the verified Style construction scope. It does not indicate that every AWG is automatically in stock, available in every colour, available with every optional covering, or available with every optional rating.
Availability of a requested size, conductor construction, covering, optional rating and colour combination is confirmed at quotation stage.
No Ampacity, Resistance, Finished OD or Flex Data
No universal current rating is published. Style 1332 provides no ampacity table, and no current is inferred from AWG, from the 200°C rating, from the 300 Vac rating or from the FEP insulation.
No universal conductor resistance is published, because the Style defines neither a universal conductor material nor a detailed strand construction, and generic AWG resistance tables are not used as product specifications.
No universal finished outside diameter is published, and none is calculated from AWG plus a minimum wall. Actual OD depends on the solid or stranded conductor, the actual conductor construction, the base FEP insulation, the optional covering selection and manufacturing tolerance. Where dimensional control matters, request the maximum OD, the OD tolerance, the routing clearance and the terminal entry.
No minimum bend radius, flex-cycle life or dynamic-flex suitability is published.
UAE Wholesale Sourcing
The commercial contexts this page addresses are UAE electrical-component distributors, UAE appliance and equipment OEM buyers, UAE B2B sourcing teams, buyers requesting repeat production quantities, and buyers requiring a controlled Style 1332 specification.
No named end users, distributor relationships, project usage, approved-vendor status or procurement qualification is claimed. Saudi Arabian enquiries can be quoted as secondary export coverage where commercially useful.
What the destination affects is the commercial side of the enquiry: the quantity, the packaging, the destination city or port, the Incoterm and the documentation the buyer needs.
Commercial Terms and Documentation
No minimum order quantity, sample quantity, mixed-size order policy, stock position, lead time, transit time, production capacity, quotation response time, fixed Incoterm, fixed port or consolidation policy is published here, and no manufacturing or quality-control procedures are described.
Required documentation should be identified by the buyer and confirmed per order rather than assumed to accompany every shipment. Applicable RoHS / REACH documentation can be confirmed according to the ordered construction. Colour is treated the same way and is an RFQ field.
Bulk Wire and Processed Leads
This page primarily represents UL AWM Style 1332 single-conductor wire.
Nothing here implies that supply automatically includes cutting, stripping, crimping, terminals, connectors or finished harnesses. Processed-wire requirements are separately specified and confirmed.
What Style 1332 Does and Does Not Define
The Style does define: 200°C; 300 Vac; Horizontal Flame; 30–10 AWG; solid or stranded round; extruded FEP; 13 mils minimum average and 12 mils minimum at any point; optional Oil Resistant 80°C; optional Gasoline Resistant; an optional FEP or glass-braid covering; marking General; and the Use, internal wiring of appliances.
The Style does not define:
- Conductor material, conductor plating, strand count, strand diameter and lay length
- Conductor resistance
- Finished OD and OD tolerance
- Ampacity and current rating
- A minimum operating temperature or a continuous-service life
- Surface gloss and friction coefficient
- Universal chemical compatibility
- Bend radius and flex-cycle life
- Colour and reel length
- MOQ, stock, lead time, production capacity and shipping term
Each requires the customer specification, verified SKU documentation, the applicable qualified construction, or commercial confirmation.
Common Procurement Errors
- Calling 200°C “200°C continuous service”.
- Adding an unsupported –60°C lower limit.
- Using 600 volts peak as a normal Style voltage rating. The normal rating is 300 Vac.
- Omitting “for electronic use only” from the optional 600 volts peak tag.
- Restricting the 13 mil insulation requirement to 30–16 AWG. It applies across 30–10 AWG.
- Omitting the 12 mil minimum-at-any-point requirement.
- Assuming all Style 1332 conductors are tinned copper.
- Assuming silver plating is universally available.
- Claiming VW-1 when only Horizontal Flame is verified.
- Treating optional Oil Resistant 80°C as standard.
- Treating optional Gasoline Resistant as standard.
- Treating the optional covering as mandatory, or as both options at once.
- Claiming universal chemical resistance from the material name.
- Assuming the full 30–10 AWG range is stocked.
- Expanding appliance internal wiring into field instrumentation or building wiring.
UAE Wholesale RFQ Checklist
- UL AWM Style 1332 requirement
- Required AWG within 30–10 AWG
- Solid or stranded round requirement
- Required conductor material
- Required conductor finish or plating
- Detailed strand construction, if controlled
- 200°C Style requirement
- 300 Vac requirement
- Whether Oil Resistant 80°C is required
- Whether Gasoline Resistant is required
- Whether gasoline or gasoline-vapor immersion tagging is required
- Whether the optional 600 volts peak for electronic use only tag is required
- Whether the optional extruded FEP covering is required
- Whether the optional glass braid is required
- Exact appliance internal-wiring application
- Customer drawing
- Existing wire specification or bill of materials
- Maximum finished OD, if controlled
- OD tolerance
- Insulation or covering colour, if controlled
- Bulk wire or processed lead requirement
- Quantity
- Packaging
- UAE destination
- Destination city or port
- Requested Incoterm
- Required compliance or shipping documentation
None of these values is invented here, and no requested configuration is presented as automatically available.
UL Marking and Documentation
Material is supplied as UL-recognized component wire where supplied under qualified manufacturing scope, and UL marking is applied according to the confirmed ordered construction. The Style-level marking designation is General.
CSA AWM, FT1, VW-1 and dual UL / CSA certification are not claimed here; any additional certification depends on the ordered construction. Applicable RoHS / REACH documentation can be confirmed according to the ordered construction.
