UL 3573 10,000V Silicone Rubber Ignition Wire — Riyadh and Saudi Arabia Supply
UL AWM Style 3573 is a high-voltage silicone rubber ignition lead wire rated 200°C and 10,000V AC under UL Subject 758. The construction uses three layers: extruded silicone rubber inner insulation (30 mils min average / 27 mils min at any point), a fiberglass braid or serve intermediate covering, and an additional extruded silicone rubber outer insulation (10 mils min at any point over the braid). The permitted use covers electronic ignition or similar applications in gas ranges and gas or fuel oil burner systems, where the wire is protected from damage during handling, installation, and servicing of the appliance.
For the two-layer UL 3304 construction (40 mils silicone rubber + fiberglass braid, without outer silicone jacket) at the same 10,000V AC / 200°C rating, see UL 3304 ignition wire. Supply to Saudi Arabia is available CIF Jeddah.
Product Specifications — UL AWM Style 3573
| Parameter | Specification |
|---|---|
| UL AWM Style | 3573 |
| UL Subject | 758, Section 3 |
| Temperature rating | 200°C maximum |
| Voltage rating | 10,000V AC |
| AWG range | 22 AWG – 12 AWG, solid or stranded round |
| Inner insulation | Extruded silicone rubber (SR) — 30 mils min average / 27 mils min at any point |
| Intermediate covering | Fiberglass braid or serve |
| Outer insulation | Extruded silicone rubber (SR) — 10 mils min at any point over braid |
| Conductor | Solid or stranded copper; tinned or nickel-plated options available |
| Flame rating | Horizontal flame |
| UL recognition | UL Recognized Component — file on record |
| Permitted use | Electronic ignition or similar application in gas ranges or gas or fuel oil burner systems — protected from damage during handling, installation, and servicing |
| Colour options | Red, black, white; custom available on request |
| RoHS / REACH | Documentation available on request |
UL 3573 vs UL 3304 — Construction Comparison
| Parameter | UL 3573 | UL 3304 |
|---|---|---|
| Voltage rating | 10,000V AC | 10,000V AC |
| Temperature rating | 200°C | 200°C |
| AWG range | 22–12 AWG | 22–12 AWG |
| Construction | SR 30 mils inner + fiberglass braid + SR 10 mils outer (three layers) | SR 40 mils + fiberglass braid (two layers) |
| Outer surface | Silicone rubber outer layer over braid | Fiberglass braid as outermost layer |
| Permitted use | Gas ranges / gas or fuel oil burner systems — protected from damage | Gas ranges / gas or fuel oil burner systems — protected from damage |
Applications in Saudi Arabia
Gas appliance ignition lead routing — Riyadh OEMs
Gas range manufacturers, commercial oven assemblers, and water heater producers in Riyadh sourcing ignition wire for the Saudi domestic market specify UL 3573 for internal ignition lead routing inside enclosed appliance housings — routed from the ignition transformer output to the spark electrode connector, in a protected internal path. The three-layer construction provides an outer silicone rubber surface over the fiberglass braid.
Industrial burner control enclosures — Saudi Arabia
Ignition module to HV output connector wiring inside burner management control panels used in Saudi Arabia’s industrial process heating and furnace equipment, where the compact, high-temperature panel environment requires the wire to be routed in a protected internal path alongside other control wiring.
Commercial boiler ignition systems — Riyadh
Enclosed ignition lead routing inside commercial gas boiler casings for Riyadh HVAC plant, where the wire is routed in a protected internal path and accessed by maintenance technicians during service. Wire routing must be protected from damage during handling, installation, and servicing as required by the UL permitted use.
Other applications
- Industrial drying oven burner ignition panel wiring — protected internal routing
- Gas-fired infrared heating equipment ignition leads — enclosed routing
- Commercial catering equipment ignition wiring
Key Features
Product
- UL AWM Style 3573, 200°C, 10,000V AC
- UL Recognized Component — file on record
- Three-layer construction: SR inner + fiberglass braid + SR outer
- 22–12 AWG, solid or stranded copper
- Tinned or nickel-plated conductor options
- Horizontal flame rated
Supply for Saudi Arabia
- Export supply, CIF Jeddah — confirm transit time at enquiry
- UL compliance documentation available on request
- Arab League CoO available on request
- MOQ 500 m per AWG/colour
- Lead time confirmed at enquiry stage
Ordering Information
Specify AWG, conductor type (tinned or nickel-plated), colour, and quantity. UL compliance documentation and RoHS Declaration supplied on request. Arab League Certificate of Origin available on request.
Request CIF Jeddah pricing for Riyadh and Saudi Arabia. Provide AWG, quantity, and required documentation. Response within 24 hours. Contact us.
