UL 10362 PFA Wire 250°C 600V for Vietnam and Indonesia — Fluoropolymer AWM Style 10362 Internal Wiring

UL 10362 PFA Wire 250°C 600V for Vietnam and Indonesia

UL 10362 is an extruded PFA (perfluoroalkoxy) fluoropolymer insulated wire rated 250°C and 600V AC under UL AWM Style 10362, produced under UL Follow-Up Service File No. E333030. UL 10362 covers a conductor range from 30 AWG to 4/0 AWG in solid or stranded construction. The PFA insulation wall thickness is graded by conductor size and is notably thinner than FEP insulation at the same temperature and voltage rating: 10 mils minimum average thickness for 30–10 AWG (versus 20 mils for UL 1659 FEP at the same AWG range), 30 mils for 9–2 AWG, and 45 mils for 1–4/0 AWG. The thinner insulation wall is possible because PFA has a higher dielectric strength than FEP — PFA can achieve the same 600V insulation rating with less wall thickness, producing a smaller finished wire OD at the same conductor cross-section.

PFA (perfluoroalkoxy) is a member of the PTFE fluoropolymer family, positioned above FEP in both performance and cost. PFA shares FEP’s extrudability — it can be melt-processed and extruded over conductors in continuous wire production, unlike PTFE — but delivers superior dielectric properties, better thermal stability at sustained high temperatures, and lower gas permeability than FEP. The practical result for equipment internal wiring in Vietnam and Indonesia is that UL 10362 PFA wire produces a smaller finished wire diameter at the same AWG and voltage rating than UL 1659 FEP wire — at 30–10 AWG, the 10 mils PFA wall versus the 20 mils FEP wall means the UL 10362 wire is measurably smaller in overall diameter, which is significant for fine AWG wiring in compact equipment where the wire bundle diameter at routing locations is a design constraint.

Vietnamese precision equipment OEMs and electronics manufacturers assembling compact high-temperature equipment for export describe UL 10362 as dây PFA 250°C cao nhiệt (PFA 250°C high-heat wire), while Indonesian industrial equipment suppliers and manufacturers describe UL 10362 as kabel PFA 250°C supplier or kabel PFA pabrik. CableApex exports UL 10362 factory-direct CIF Ho Chi Minh City and CIF Surabaya from Yangzhou.

Product Specifications — UL 10362

Insulation Wall Thickness by Conductor Size

UL 10362 PFA vs UL 1659 FEP — Same Rating, Different Insulation

Applications in Vietnam and Indonesia

Compact high-temperature equipment — minimum wire OD (Vietnam — precision export OEMs)

Vietnamese precision equipment OEMs and electronics manufacturers assembling compact high-temperature equipment for export to North American and European markets specify UL 10362 for the internal wiring in equipment where the wire bundle diameter at routing locations inside the compact equipment enclosure is a design constraint. In compact high-temperature equipment designs — laboratory heating instruments, precision temperature controllers, compact semiconductor test equipment, and miniaturised industrial process control equipment — the internal wire routing space is designed to the minimum necessary to achieve the equipment’s compact footprint for export packaging and shipping. At fine AWG sizes (30–22 AWG), UL 10362 PFA wire’s 10 mils insulation wall produces a measurably smaller finished wire diameter than UL 1659 FEP wire’s 20 mils wall at the same conductor size — a difference that can be significant in compact wire bundle routing where multiple conductors are routed together through a passage with a defined maximum bundle diameter.

Vietnamese precision equipment OEMs sourcing UL 10362 as dây PFA 250°C cao nhiệt for their compact export equipment builds procure factory-direct from CableApex in Yangzhou — manufacturer pricing on this premium PFA fluoropolymer specification without the distributor markup applied to specialty PFA wire through Vietnamese electrical wire distribution channels.

Equipment specifying PFA insulation by material designation (Vietnam and Indonesia)

Vietnamese and Indonesian equipment manufacturers assembling products under design specifications that explicitly require PFA insulation — rather than FEP — specify UL 10362 to satisfy the material designation in the equipment design documentation. International equipment design standards and specific equipment types designate PFA insulation by name in the internal wiring specification: semiconductor equipment, pharmaceutical manufacturing equipment, and certain medical device applications specify PFA insulation for the internal wiring because PFA’s lower gas permeability and superior chemical purity compared to FEP are required for the equipment’s intended operating environment. Vietnamese and Indonesian equipment OEMs assembling these products for export to markets where the equipment design documentation specifies PFA insulation source UL 10362 to satisfy the PFA material designation requirement.

Ultra-fine AWG 30–26 high-temperature wiring (Vietnam — electronics manufacturing)

Vietnamese electronics manufacturers assembling precision instruments, analytical equipment, and compact electronic devices for export specify UL 10362 in the ultra-fine AWG range (30–26 AWG) for high-temperature internal wiring at routing locations where the wire ambient temperature exceeds 200°C and the minimum wire diameter at the routing location is critical. At 30 AWG, UL 10362 PFA wire with a 10 mils insulation wall produces a finished wire that is substantially smaller in overall diameter than any 250°C / 600V wire alternative in the silicone rubber or FEP families — making UL 10362 the only practical specification for ultra-fine AWG internal wiring at 250°C / 600V in compact exported electronic equipment where routing space at the wire location is at a premium.

High-temperature industrial equipment internal wiring (Indonesia — supplier pabrik)

Indonesian industrial equipment manufacturers and suppliers in Bekasi, Surabaya, and Batam assembling high-temperature industrial equipment for the domestic Indonesian market and for export specify UL 10362 as kabel PFA 250°C supplier or kabel PFA pabrik for internal wiring applications where PFA insulation is specified by the equipment design or where the minimum finished wire diameter at 250°C / 600V is required. Indonesian industrial equipment procurement sourcing factory-direct from CableApex in Yangzhou receives UL AWM Style 10362 certified PFA wire at manufacturer pricing — eliminating the distributor markup applied to premium PFA fluoropolymer wire through Indonesian electrical cable distribution channels.

Additional applications across Vietnam and Indonesia

• Pharmaceutical and food processing equipment internal wiring — Vietnamese and Indonesian pharmaceutical equipment manufacturers where PFA insulation’s chemical purity and low gas permeability are specified for equipment in clean manufacturing environments
• Semiconductor manufacturing equipment internal wiring — Vietnamese and Indonesian semiconductor equipment manufacturers where PFA insulation is specified to meet semiconductor fabrication equipment cleanliness standards
• Analytical instrument internal wiring — Vietnamese precision instrument manufacturers assembling chromatography equipment, spectrometers, and analytical instruments for export where PFA insulation is specified for the internal wiring at high-temperature locations
• High-purity chemical handling equipment — Indonesian chemical industry equipment manufacturers where PFA insulation’s resistance to aggressive chemical environments is required alongside the 250°C / 600V rating

Key Features

Ordering Information

Specify AWG (30 AWG–4/0 AWG), conductor type (solid or stranded), and quantity. MOQ 500 m per AWG. Mixed AWG orders accepted. UL 10362 compliance documentation and RoHS Declaration supplied with every order. For FEP wire at the same 250°C / 600V rating with oil/gasoline resistance options, see UL 1659. For 200°C / 300V FEP wire, see UL 1332. Sample from 10 m.

Why CableApex for Vietnam and Indonesia

CableApex manufactures UL 10362 PFA fluoropolymer wire under UL Follow-Up Service File No. E333030 in Yangzhou, China. Factory-direct export to Vietnam and Indonesia — CIF Ho Chi Minh City or CIF Surabaya, 10–14 day transit. Full UL compliance documentation for equipment OEM qualification and industrial procurement. No distributor margin on factory-direct orders. Contact us within 24 hours.

Please enable JavaScript in your browser to complete this form.

Company Name

Email Name Work

Full Name *

Work Email *

Phone / WhatsApp

Request a Quote