UL 1911 High Voltage Wire for Vietnam and Indonesia
UL 1911 is a high voltage wire specification covering any insulation material construction, rated up to 250°C and up to 50000V DC maximum under UL AWM Style 1911, produced under UL Follow-Up Service File No. E333030. UL 1911 covers conductor sizes from 24 AWG to 10 AWG in solid or stranded round construction. Like UL 3239, UL 1911 is a framework specification — the specific temperature rating, voltage rating, and insulation material for each UL 1911 product are defined by the individual insulation construction and confirmed at time of production. The upper limits of 250°C and 50000V DC represent the maximum range covered by the Style, with individual products rated at the temperature and voltage appropriate to their insulation construction as confirmed under File No. E333030.
UL 1911 is specifically designated for internal wiring of electronic gas ignitor systems — a narrower and more specific use designation than UL 3239’s “TV receivers or where acceptability determined by UL.” This specific designation makes UL 1911 the correct AWM specification for high-voltage DC wiring in electronic gas ignitor systems where the DC voltage component of the ignition circuit exceeds the AC voltage limits of UL 3304 and UL 3573, or where the DC voltage in the ignition charging circuit requires a DC-rated high voltage specification rather than an AC-rated one. Electronic gas ignitor systems — particularly capacitive discharge ignition (CDI) systems — charge a capacitor to a high DC voltage (typically 300V to several kilovolts DC) and then discharge it through an ignition coil to generate the high-voltage ignition pulse at the spark electrode. The internal wiring in the DC charging section of a CDI ignition system carries this high DC voltage and requires a DC-rated specification such as UL 1911.
Vietnamese high-voltage equipment exporters and gas ignition system manufacturers describe UL 1911 as dây cao áp hệ thống đánh lửa gas xuất khẩu (high voltage gas ignition system wire for export) or dây điện cao áp DC xuất khẩu (DC high voltage wire for export). Indonesian gas equipment suppliers and industrial burner system manufacturers describe UL 1911 as kabel tegangan tinggi DC sistem ignisi gas harga grosir (DC high voltage gas ignition system cable wholesale price). CableApex exports UL 1911 factory-direct CIF Ho Chi Minh City and CIF Surabaya from Yangzhou.
UL 1911 Framework Specification — Key Parameters
| Parameter | Specification |
|---|---|
| UL AWM style | 1911 |
| Maximum temperature | 250°C (actual rating depends on insulation construction) |
| Maximum voltage | 50000V DC (actual rating depends on insulation construction) |
| Insulation type | Any material — confirmed at production per insulation construction |
| Conductor | Solid or stranded round, 24 AWG – 10 AWG |
| Flame rating | Horizontal flame |
| Use designation | Internal wiring of electronic gas ignitor systems |
| UL file number | E333030 |
| Compliance | RoHS, REACH |
High Voltage Wire Selection — UL 1911 vs UL 3304 vs UL 3573 vs UL 3239
| Style | Max voltage | Voltage type | Max temp | Use designation |
|---|---|---|---|---|
| UL 3304 | 10000V | AC | 200°C | Gas range / burner ignition |
| UL 3573 | 10000V | AC | 200°C | Gas range / burner ignition (dual layer) |
| UL 1911 | 50000V DC | DC | 250°C | Electronic gas ignitor systems |
| UL 3239 | 60000V DC | DC | 200°C | TV receivers / UL-determined applications |
How to Specify UL 1911 — What to Provide at Enquiry
UL 1911 is a framework specification — the specific insulation construction is confirmed based on your application requirements. When enquiring, please provide:
Required: AWG size · Required DC voltage rating (V DC) · Required temperature rating (°C) · Conductor type (solid or stranded) · Application description (ignition system type)
Optional: Insulation material preference · Quantity and destination port
CableApex will confirm the applicable UL 1911 insulation construction under File No. E333030 that covers your specified DC voltage and temperature requirements, and provide pricing accordingly.
Applications in Vietnam and Indonesia
Capacitive discharge ignition (CDI) system DC charging wiring (Vietnam — export)
Vietnamese gas equipment manufacturers and ignition system OEMs assembling capacitive discharge ignition (CDI) systems for gas appliances, industrial gas burners, and gas turbine ignition systems for export to international markets specify UL 1911 for the internal DC charging circuit wiring in the CDI ignition module. A CDI ignition system charges a high-voltage capacitor to a DC voltage — typically 300V to 3000V DC in domestic gas appliance CDI systems, and up to 10000V DC or higher in industrial CDI ignition systems — and discharges this stored energy through a pulse transformer to generate the high-voltage ignition pulse at the spark electrode. The internal wiring in the DC charging section of the CDI module, from the DC-DC converter output to the high-voltage capacitor terminals, carries the charged DC voltage and requires a DC-rated high voltage specification. UL 3304 and UL 3573’s 10000V AC rating does not cover DC voltages in the same way as UL 1911’s dedicated DC voltage rating — UL 1911 is the correct UL AWM specification for the DC section internal wiring of CDI ignition systems submitted for UL listing for export to North American markets.
Vietnamese CDI ignition system exporters sourcing UL 1911 as dây cao áp hệ thống đánh lửa gas xuất khẩu procure factory-direct from CableApex in Yangzhou — the UL AWM Style 1911 recognition under File No. E333030 satisfying the UL component recognition requirement for CDI ignition modules submitted for UL listing for export to international markets.
50000V DC gas ignition wire — Indonesia (harga grosir)
Indonesian gas burner system manufacturers, industrial gas ignition system assemblers, and gas turbine ignition system suppliers sourcing high-voltage DC wire at the upper end of UL 1911’s 50000V DC range — specifically mentioned in the long-tail keyword list for this style in Indonesia — specify UL 1911 for the internal high-voltage DC wiring in industrial gas ignition systems where the DC voltage in the ignition charging circuit reaches tens of kilovolts. Industrial gas turbine ignition systems, industrial plasma ignition systems, and high-energy industrial spark ignition systems for large-diameter industrial gas burners generate stored DC voltages of 10000V to 50000V in the ignition capacitor bank before discharge — the internal wiring from the high-voltage DC power supply to the ignition capacitor bank requiring UL 1911 certification at the applicable DC voltage rating. Indonesian industrial procurement sourcing kabel tegangan tinggi DC sistem ignisi gas harga grosir factory-direct from Yangzhou receives UL AWM Style 1911 certified high-voltage DC ignition wire at manufacturer pricing.
High-voltage gas ignition wire for export (Vietnam — dây điện cao áp xuất khẩu)
Vietnamese gas equipment exporters assembling gas appliances, commercial gas cooking equipment, and industrial gas burning systems for export to North American, European, and international markets where UL listing is required specify UL 1911 for the internal high-voltage DC wiring sections of their ignition systems — where the DC voltage in the ignition circuit is DC-rated and where the 250°C maximum temperature rating of UL 1911 provides thermal margin for the wire routing location in high-temperature gas appliance ignition system assemblies near the burner and combustion chamber. The UL AWM Style 1911 recognition under File No. E333030 satisfies the UL component recognition requirement for the high-voltage DC wiring sections of gas ignition systems in UL-listed gas appliances exported from Vietnam to international markets.
Industrial gas turbine and plasma ignition systems (Vietnam and Indonesia)
Vietnamese and Indonesian industrial equipment manufacturers and engineering companies assembling industrial gas turbine ignition systems, plasma ignition systems for industrial gas burners, and high-energy ignition systems for large industrial combustion chambers specify UL 1911 for the internal high-voltage DC wiring in the ignition energy storage and discharge section of their ignition systems. Industrial gas turbine ignition systems typically operate with ignition energies of 1–20 joules stored at DC voltages of 1000V to 10000V in the ignition capacitor — the internal wiring from the capacitor charging supply to the capacitor bank requiring DC-rated high voltage AWM wire at the applicable voltage and temperature rating. UL 1911’s 250°C maximum temperature rating — 50°C above UL 3239’s 200°C maximum — provides additional thermal margin for ignition system assemblies in high-temperature gas turbine ignition environments where the ambient temperature at the wire routing location exceeds 200°C.
Additional applications across Vietnam and Indonesia
- Commercial kitchen gas range CDI ignition module wiring — Vietnamese and Indonesian commercial catering equipment manufacturers assembling CDI ignition systems for commercial gas ranges requiring UL 1911 for the DC charging circuit wiring
- Gas water heater electronic ignition system wiring — Vietnamese and Indonesian gas water heater manufacturers assembling electronic ignition systems with DC charging circuits requiring UL AWM 1911 for the high-voltage DC section
- Industrial furnace high-voltage ignition wiring — Vietnamese and Indonesian industrial furnace manufacturers assembling high-energy ignition systems for industrial gas furnaces and kilns
- LPG vaporiser and tank farm ignition systems — Indonesian LPG terminal and storage facility operators requiring UL-certified high-voltage DC ignition wire for their gas ignition system maintenance
Key Features
Product
- UL AWM Style 1911, up to 250°C, up to 50000V DC
- File No. E333030 — UL Follow-Up Service
- Designated for electronic gas ignitor systems
- DC voltage rating — not AC
- Conductor range: 24 AWG – 10 AWG
- Construction confirmed to application
- Horizontal flame rating
Supply for Vietnam and Indonesia
- Factory-direct from Yangzhou, China
- CIF Ho Chi Minh City — 10–14 day transit
- CIF Surabaya — 10–14 day transit
- Full UL and compliance documentation
- MOQ 500 m per specification
- Lead time confirmed at enquiry stage
- Specification confirmed before order
Ordering Information
UL 1911 is a custom-specification product. Provide AWG, required DC voltage rating, required temperature rating, application description (ignition system type), quantity, and destination port. CableApex will confirm the applicable UL 1911 construction under File No. E333030 and provide pricing. For 10000V AC ignition wire with fixed specification, see UL 3304 or UL 3573. For general high voltage DC wire up to 60000V DC, see UL 3239. Contact us to discuss your specification.
Request pricing for UL 1911. Provide AWG, DC voltage rating, temperature rating, and gas ignition system application details. We respond within 24 hours. Contact us.
Why CableApex for Vietnam and Indonesia
CableApex manufactures UL 1911 high voltage wire under UL Follow-Up Service File No. E333030 in Yangzhou, China. Factory-direct export to Vietnam and Indonesia — CIF Ho Chi Minh City or CIF Surabaya, 10–14 day transit. Full UL compliance documentation for gas ignition system OEM qualification and export product listing. No distributor margin on factory-direct orders. Contact us with your specification requirements within 24 hours.
