UL 1571 Hook-Up Wire 28 AWG · SR-PVC · 80°C · 30V

UL 1571 · 80°C maximum · 30 Vac · 28 AWG (50 AWG minimum and above) · Extruded SRPVC, 2 mils minimum at any point · Solid or stranded conductor · Horizontal flame · UL Recognized Component — file on record · Internal wiring of Class 2 circuits in electronic equipment · Quotes within 12 hours

UL 1571 Hook-Up Wire 28 AWG — Extruded SR-PVC, 80°C Maximum, 30 Vac, Class 2

UL 1571 in 28 AWG with extruded SRPVC (silicone-rubber-modified PVC) insulation is a single-conductor AWM wire rated 80°C maximum at 30 Vac, for internal wiring of Class 2 circuits in electronic equipment. CableApex supplies the SRPVC variant where improved flexibility and dimensional stability under thermal cycling are required alongside the standard 30 Vac Class 2 recognition.

UL 1571 28 AWG cross-section diagram SRPVC insulation 2 mils minimum wall, 80C 30Vac Class 2

UL Recognized Component — file on record. Style 1571 appliance wiring material evaluated under UL Subject 758.

UL 1571 28 AWG SR-PVC Specifications

ItemSpecification
UL Style1571 — single conductor with extruded insulation
Temperature Rating80°C maximum
Voltage Rating30 Vac
Conductor28 AWG, solid or stranded (style minimum: 50 AWG)
Insulation (this page)Extruded SRPVC (silicone-rubber-modified PVC), 2 mils minimum thickness at any point, 100 mils maximum
Flame RatingHorizontal flame
Optional CoveringExtruded PVC, Nylon, ETFE, Polyester, XLPVC, XL Nylon, XLETFE or XL Polyester (2 mils min at any point), or lacquered braid
Optional Shield / JacketShield optional; jacket optional (same materials as covering); additional outer shield and covering optional
UL RecognitionUL Recognized Component — file on record
MarkingPer UL Subject 758 marking requirements
Permitted UseInternal wiring of Class 2 circuits in electronic equipment
RoHS / REACHDocumentation available on request

PVC vs. SR-PVC: Choosing the Right UL 1571 Insulation

PropertyPVCSRPVC (this page)
UL Rating80°C / 30 Vac80°C / 30 Vac
FlexibilityStandardImproved — SR modifier reduces stiffness
Thermal cycling stabilityGoodEnhanced dimensional stability
Typical useGeneral Class 2 signal wiringFine-pitch harnesses, instruments with thermal cycling

UL 1571 28 AWG SR-PVC wire routed inside electronic instrument for Class 2 signal circuit wiring

Applications

Within its permitted use — internal wiring of Class 2 circuits in electronic equipment — UL 1571 28 AWG SRPVC suits fine-pitch signal harnesses, sensor leads and internal control wiring in equipment that experiences repeated thermal cycling or requires greater flexibility than standard PVC provides at 28 AWG. For applications outside Class 2 internal electronic wiring, confirm application suitability before specifying.

Key Features

  • SRPVC insulation: improved flexibility over standard PVC at 28 AWG
  • 30 Vac Class 2 rating; 80°C maximum temperature
  • Eight insulation material variants available within Style 1571
  • Fine-gauge capability from 50 AWG minimum
  • Horizontal flame rated; optional shield, jacket and covering
  • UL Recognized Component — file on record

Macro cut end of UL 1571 28 AWG wire showing SRPVC insulation and fine stranded copper conductor cross-section

Request a Quote

CableApex supplies UL 1571 28 AWG SRPVC from 100 m per color and responds to B2B inquiries within 12 hours. Submit your target quantity, conductor construction (solid or stranded) and colors through the form below.

Related UL styles: UL 1571 PVC variant · UL 1007 Wire (300 Vac) · UL 1032 Wire (1000 Vac)

Scroll to Top