UL AWM 1571 PVC Signal Wire 24 AWG — Class 2 Internal Wiring for Data and Signal Circuits, 30 Vac, 80°C
UL AWM 1571 in 24 AWG with extruded PVC insulation is a single-conductor signal wire rated 80°C maximum at 30 Vac, recognised for internal wiring of Class 2 circuits in electronic equipment. The 24 AWG size is a widely adopted standard for internal data and signal conductors — its balance of conductor cross-section, bend flexibility and insulation diameter makes it a natural fit for board-to-sensor signal runs, data acquisition wiring and Class 2 control signal conductors inside compact and mid-size electronic equipment. CableApex supplies UL AWM 1571 24 AWG as a UL Recognized Component — file on record.
Why 24 AWG Is the Standard Signal Wire Gauge
| Property | Finer (30–28 AWG) | 24 AWG (this page) | Heavier (22 AWG) |
|---|---|---|---|
| DC resistance | Higher — limits longer runs | Moderate — suits most signal runs | Lower — suited for longer circuits |
| Bundle diameter | Very slim | Slim — fits dense harnesses | Slightly wider |
| Termination ease | Requires care | Easy — widely tooled | Easy |
| Flexibility | High | Good | Moderate |
UL AWM 1571 24 AWG Specifications
| Item | Specification |
|---|---|
| UL Style | 1571 — single conductor with extruded insulation |
| Temperature Rating | 80°C maximum |
| Voltage Rating | 30 Vac |
| Conductor | 24 AWG, solid or stranded (style minimum: 50 AWG) |
| Insulation (this page) | Extruded PVC, 2 mils minimum thickness at any point, 100 mils maximum |
| Available Insulation Materials | PVC, SRPVC, foamed PVC, foamed SRPVC, XLPVC, XLSRPVC, foamed XLPVC, foamed XLSRPVC |
| Flame Rating | Horizontal flame; VW-1 vertical flame test available |
| Optional Covering | PVC, Nylon, ETFE, Polyester, XLPVC, XL Nylon, XLETFE or XL Polyester (2 mils min), or lacquered braid |
| Optional Shield / Jacket | Shield optional; jacket optional (same as covering); additional outer shield and covering optional |
| UL Recognition | UL Recognized Component — file on record |
| Marking | Per UL Subject 758 marking requirements |
| Permitted Use | Internal wiring of Class 2 circuits in electronic equipment |
| RoHS / REACH | Documentation available on request |
Applications
Within its permitted use — internal wiring of Class 2 circuits in electronic equipment — UL AWM 1571 24 AWG PVC suits board-to-sensor signal conductors, data acquisition wiring harnesses, low-voltage Class 2 control signal runs and internal interface wiring between modules inside electronic equipment operating within 30 Vac. The 24 AWG cross-section is compatible with the widest range of standard crimp and IDC termination tooling, which simplifies harness assembly in production environments. For applications outside Class 2 internal electronic wiring, confirm application suitability before specifying.
Key Features
- 24 AWG — the industry-standard signal wire gauge for Class 2 internal circuits
- Compatible with the widest range of standard crimp and IDC termination tooling
- Eight insulation material variants within Style 1571 including foamed and XL options
- Optional shield, jacket and covering for EMI-sensitive signal runs
- Horizontal flame; VW-1 vertical flame test available
- UL Recognized Component — file on record
Request a Quote
CableApex supplies UL AWM 1571 24 AWG PVC from 100 m per color and responds to B2B inquiries within 12 hours. Specify conductor construction (solid or stranded), insulation material variant, colors and any optional constructions through the form below.
Other UL 1571 sizes: 30 AWG · 28 AWG SR-PVC · 26 AWG PVC · UL 1571 Hook-Up Wire category
