UL 1283 8 AWG PVC Power Wire Overview
UL AWM Style 1283 is a single-conductor PVC insulated wire construction, supplied by CableApex as a factory-direct manufacturer. This page focuses specifically on the 8 AWG configuration within Style 1283’s broader 8 AWG–2 AWG conductor range. The wire is rated 105°C and 600 Vac, with a substantial 60 mil minimum average PVC insulation wall. UL defines the Style’s use simply as internal wiring; “power wire” and “equipment internal power connection” are CableApex’s commercial positioning for this product, reflecting how buyers typically source this construction for internal power connections within equipment — not a UL-defined application label in itself.
105°C / 600 Vac UL Style 1283 Construction
| Parameter | UL Style 1283 |
|---|---|
| UL Subject / Section | 758, Section 1 |
| Construction | Single conductor with extruded insulation |
| Featured Size | 8 AWG |
| UL Style Conductor Range | 8 AWG – 2 AWG |
| Conductor Form | Solid, stranded, or qualifying braided construction |
| Rated Temperature (Maximum) | 105°C |
| Voltage Rating | 600 Vac |
| Flame Rating | Horizontal flame |
| Insulation | Extruded PVC, 60 mil min. average / 54 mil min. at any point |
| Optional Oil Rating | 60°C or 80°C, where included in the qualified construction |
| Marking | General; tags may optionally indicate “2500 Volts Peak – for Electronic Use Only” |
| Use | Internal wiring |
| RoHS / REACH | Confirmed during quotation according to ordered materials and documentation requirements |
600 Vac is the primary continuous voltage rating for this product. Certain qualified Style 1283 constructions may carry the permitted “2500 Volts Peak – for Electronic Use Only” tag statement — this is a distinct marking provision, not a 2500 Vac continuous rating, and this page does not describe the product as a 2500V or 2.5kV wire on that basis.
8 AWG Power Connection Wire for Equipment Internal Wiring
This page focuses specifically on the 8 AWG configuration within UL Style 1283’s 8 AWG–2 AWG conductor range. The featured combination — 8 AWG, 105°C, 600 Vac, and the 60 mil PVC insulation wall — is what differentiates this page from a general Style 1283 overview. We do not publish an ampacity figure, current rating, breaker size, or fuse size for this or any AWG; current-carrying requirements depend on the equipment design, installation conditions, and applicable end-equipment evaluation, not on AWG alone.
60-Mil PVC Insulation Construction
The conductor is insulated with extruded PVC at a minimum average thickness of 60 mils and a minimum thickness of 54 mils at any point. We describe this construction factually and do not infer from it any unsupported performance claim such as superior abrasion resistance, crush resistance, impact resistance, mechanical abuse resistance, or heavy-duty field-use suitability — those characteristics are not established by the Style-level record. We do not calculate or publish a finished outside diameter from AWG and insulation thickness, as conductor geometry and production tolerances are not part of the confirmed technical basis for this page.
Solid, Stranded and Braided Conductor Options
UL Style 1283 permits solid, stranded, or a braided conductor construction consisting of 40–20 AWG strands. The 40–20 AWG figure refers to the strand size used within a braided conductor build — it does not change the finished Style conductor range, which remains 8 AWG–2 AWG. Conductor construction should be confirmed against the qualified Style 1283 configuration and your order requirement rather than assumed as a single default option. Conductor material and plating are not established at the Style level and should also be specified when requesting a quotation.
Equipment Internal Power Connection Applications
UL Style 1283’s confirmed use is internal wiring. Appropriate commercial application language for this page includes equipment internal power connections, appliance internal power connections, internal connections between protected equipment components, OEM electrical equipment internal wiring, and protected internal power routing. Motor leads, transformer leads, or terminal-block connections may be mentioned only as possible equipment-design examples where the equipment specification calls for Style 1283 — not as UL-defined applications, and not as this page’s sole positioning. This page does not promote UL 1283 as building wire, branch circuit wire, a THHN replacement, feeder wire, panel building wire, conduit wire, utility power wire, or house wiring; final acceptability for any specific installation depends on the equipment design and applicable end-product requirements.
UL 1283 vs Other PVC AWM Power Wire
UL Style 1283 is one of several PVC AWM constructions CableApex offers for different equipment wiring needs. Our UL 1015 pages address general 600V PVC internal wiring across a broader conductor range without the 8 AWG / 60 mil focus of this page. Our UL 10269 6 AWG PVC Wire page covers a 1000 Vac / 1250 Vdc construction, a different voltage envelope from UL 1283’s 600 Vac rating. Our UL 1056 Refrigerating Equipment Wire is defined specifically for refrigerating-equipment internal wiring, a narrower application boundary than UL 1283’s general internal-wiring use. Neither Style is a universal substitute for another — select based on the confirmed rating and conductor size your equipment specification calls for.
What to Specify When Ordering UL 1283 8 AWG Wire
To provide an accurate quotation for UL 1283 8 AWG PVC power wire, please specify:
- Required conductor size (this page’s featured size is 8 AWG)
- Conductor construction — solid, stranded, or braided, if specified
- Conductor material or plating requirement
- Operating voltage
- Operating temperature
- Oil-rated construction requirement, if applicable
- Required finished OD or maximum installation space
- Insulation colour
- Marking requirement
- Order quantity
- Packaging requirement
- UL documentation requirement, including RoHS / REACH if needed
- Equipment type
- Internal power connection application
- Shipping destination
Send this information and we respond with a quotation within 12 business hours. Production lead time depends on the confirmed construction and order quantity, and shipping options and applicable Incoterms are confirmed during quotation according to destination.
UL Marking and Documentation
Qualifying UL AWM Style 1283 constructions can be supplied through the relevant qualified manufacturing scope for this Style. UL marking and documentation are confirmed according to the qualified Style 1283 construction supplied for the order and are not identical across every commercial variation. RoHS and REACH are separate regulatory frameworks from UL recognition; applicable RoHS / REACH documentation requirements can be confirmed according to the ordered construction.
Browse our full Power Cables category, or see the technical UL 1283 PVC Wire category for related constructions across the Style’s full conductor range.
