UL 3304 Ignition Wire Turkey — 200°C / 10,000 Vac Silicone Rubber for Gas Range & Burner OEMs
Turkey is one of the world’s leading exporters of gas cooking appliances — with major OEM production clusters in Bursa, Kocaeli, and Istanbul supplying gas ranges, commercial burners, and gas-fired heating equipment to North American and European markets. The electronic ignition lead wire inside these appliances — connecting the ignition control module to the spark electrode at each burner position — must simultaneously withstand 10,000 Vac high-voltage ignition pulses and 200°C sustained thermal exposure in proximity to gas burner flames.
UL Style 3304 is the certified construction for this specific requirement: 40-mil silicone rubber primary insulation plus fiberglass braid outer covering, rated 10,000 Vac and 200°C under UL Subject 758. CableApex supplies this wire directly to Turkish gas appliance OEMs and distributors with complete UL documentation, 12-hour quote response, and MOQ from 100 meters — matching the procurement reality of Turkey’s mid-scale appliance manufacturing sector.
Technical Specifications — UL Style 3304
| Parameter | Value |
|---|---|
| UL Style | 3304 |
| UL Subject | 758, Section 3 |
| Temperature Rating | 200°C |
| Voltage Rating | 10,000 Vac |
| Flame Rating | Horizontal flame |
| AWG Range | 22 AWG – 12 AWG, solid or stranded round |
| Conductor | Solid or stranded round copper |
| Insulation Material | Extruded SR-Silicone |
| Insulation Thickness | 40 mils min average / 36 mils min at any point |
| Outer Covering | Fiberglass braid |
| Flame Rating | Horizontal flame |
| Typical Use | Internal wiring of electronic ignition systems in gas ranges and gas or fuel oil burner systems — protected from damage during handling, installation, and servicing |
| UL Recognition | UL Recognized Component — file on record |
| MOQ | 100 meters |
| Quote Response | 12 hours |
Turkey Gas Appliance Export — Why UL 3304 Is the Correct Specification
Turkish gas range and burner manufacturers exporting to the United States require UL product certification for their finished appliances — and UL certification audits trace component wire recognition at the part level. An ignition lead wire inside a UL-listed gas range must carry the UL Recognized Component Mark and be traceable to a recognized AWM style under UL Subject 758. Style 3304 is the specific style certified for this application: electronic ignition system internal wiring in gas ranges and gas or fuel oil burner systems.
The 40-mil silicone rubber wall of Style 3304 is significantly thicker than the 30-mil wall of general-purpose silicone wire styles — this additional dielectric mass is required to withstand sustained 10,000 Vac ignition pulse stress over the appliance service life without partial discharge initiation or insulation fatigue. Turkish gas appliance OEMs specifying a thinner-wall silicone wire for ignition lead applications risk ignition system failures in the field and potential product certification non-conformances during UL audit inspections.
For Turkish electrical distributors in Istanbul’s Perpa market and Bursa’s industrial supply districts, UL 3304 is a consistent MRO demand item — appliance repair operations and small OEM manufacturers regularly require ignition wire replacement in small quantities, and CableApex’s 100-meter MOQ directly serves this demand segment.
Ignition Wire Applications for Turkish Gas Appliance Buyers
- Household gas range ignition leads — spark electrode lead wires in residential gas stoves and cooktops manufactured in Bursa and Kocaeli for export to U.S. retail markets, connecting the electronic ignition control module to the spark plug electrode at each burner position where UL 3304’s 10,000 Vac rating and 200°C thermal ceiling satisfy the ignition lead specification for all standard residential gas cooking appliance designs.
- Commercial gas burner ignition systems — high-voltage ignition leads in commercial wok burners, salamander grills, and professional range burner assemblies manufactured by Turkish commercial kitchen equipment OEMs, where continuous heavy-use operation and sustained proximity to open gas flames demand the full 10kVac dielectric rating and 200°C silicone rubber insulation of Style 3304.
- Gas-fired HVAC heating unit ignition — ignition lead wiring in gas-fired make-up air units and rooftop heating systems distributed across Turkey’s construction and HVAC sectors, where commercial-scale gas burner ignition transformers output 6,000–10,000 Vac and the ignition lead must maintain dielectric integrity through repeated ignition cycles over multi-year service life.
- Fuel oil burner ignition systems — ignition electrode leads in fuel oil fired boilers and industrial heating units used in Turkish manufacturing facilities and commercial buildings, where fuel oil ignition systems operate at higher spark energy levels than natural gas systems and require the full 10,000 Vac rated construction with fiberglass braid mechanical protection.
- MRO replacement supply — ignition wire replacement for appliance repair operations and small OEM manufacturers across Turkey’s domestic market, where damaged or aged ignition leads require like-for-like replacement with UL-recognized 10kVac-rated silicone rubber wire matching the original appliance specification.
Engineering Notes — 40-Mil Silicone Wall and AC vs DC Ignition Rating
Why 40 mils — thicker than standard silicone wire: Style 3304 specifies 40 mils minimum average silicone rubber wall — significantly thicker than the 30-mil wall of general-purpose silicone styles such as UL 3135. This heavier insulation wall directly reflects the 10,000 Vac dielectric requirement. Do not substitute thinner-wall silicone rubber styles for Style 3304 in 10kVac ignition lead applications — the insulation mass reduction compromises long-term dielectric integrity under sustained high-voltage pulse stress.
AC rating vs DC — specifying the correct ignition wire: Style 3304 is rated 10,000 Vac — an AC voltage rating for ignition transformer-fed systems that output AC high voltage, the standard configuration in fuel oil burner ignition systems and most commercial gas burner applications. For electronic spark ignition systems that generate DC high-voltage pulses — typical in residential gas appliances with piezoelectric or transistorized ignition modules — UL Style 1911 with its DC voltage rating is the correct specification. Confirm the output waveform type of your ignition system before specifying between these two styles.
Fiberglass braid — mechanical protection for servicing environments: The fiberglass braid outer covering on Style 3304 provides abrasion resistance against metal enclosure edges and mechanical protection during appliance installation and servicing access. In Turkish gas appliance OEM assembly environments where ignition leads are routed around burner mounting hardware and through enclosure frame members, the fiberglass braid prevents insulation damage at contact points that bare silicone rubber wire would not survive over repeated servicing cycles.
Request a Quote — Turkey Gas Appliance Ignition Wire Supply
Submit your AWG, color, spool format, and annual volume estimate below. Our team responds with a formal quotation within 12 business hours. Free 10-meter wire samples available for ignition system qualification testing upon request. CIF Istanbul and FOB Shanghai shipping terms available.
