UL 10269 6 AWG PVC Wire Overview
This page covers UL AWM Style 10269 PVC insulated wire in a 6 AWG construction, supplied by CableApex as a factory-direct manufacturer. UL Style 10269 covers a broad conductor range of 30 AWG through 2000 kcmil, solid or stranded round; this page focuses specifically on the 6 AWG construction. Buyers requiring a different gauge within the Style range should confirm their specific size during quotation.
This product page targets a 105°C construction of UL Style 10269, rated 1000 Vac / 1250 Vdc, for internal wiring of appliances. Conductor construction and finish, insulation colour, and packaging are confirmed according to the ordered specification.
105°C / 1000 Vac / 1250 Vdc UL Style 10269 Ratings
| Parameter | UL Style 10269 |
|---|---|
| Construction | Single conductor with extruded insulation |
| Rated Temperature | 80°C, 90°C or 105°C depending on qualified construction — this page targets 105°C |
| Voltage Rating | 1000 Vac / 1250 Vdc |
| Flame Rating | Horizontal flame; VW-1 vertical flame test available |
| Optional Condition | Oil Resistant 60°C or 80°C (order-specific, not default) |
| Conductor Size Range (Style) | 30 AWG – 2000 kcmil, solid or stranded round |
| Insulation | Extruded PVC, 60 mil min. average / 54 mil min. at any point (6–2 AWG range) |
| Marking | General; tags may optionally indicate 3500 V peak — For Electronic Use Only |
| Use per UL Style file | Internal wiring of appliances |
| RoHS / REACH | Confirmed during quotation according to ordered materials and documentation requirements |
6 AWG Construction and 60/54 Mil PVC Insulation Wall
This page is built around the 6 AWG conductor size, which falls within UL Style 10269’s 6 AWG–2 AWG insulation-wall bracket. At this gauge, extruded PVC insulation is applied at the Style’s 60 mil minimum average / 54 mil minimum-at-any-point thickness. Insulation colour should be specified and confirmed with your order. We do not publish a finished outside diameter, dielectric strength, elongation, tensile strength, bending radius, or flex-life figure on this page, as these depend on the actual ordered construction and are not established by the Style-level record.
Solid or Stranded Round Conductor Requirements
At 6 AWG, the conductor can be supplied solid or stranded round per the Style scope. Conductor material and finish are not fixed by the UL Style definition and are confirmed according to your ordered specification rather than assumed as a default. We do not state a specific conductor material, copper purity, strand count, strand diameter, conductor resistance, or ampacity, as these depend on the actual ordered construction. If your application requires a specific conductor material or finish, specify this when requesting a quotation.
Optional Oil-Resistant Construction and Marking Boundaries
UL Style 10269 permits an optional oil-resistant condition at 60°C or 80°C. This is not a default feature of every UL 10269 6 AWG wire, and a 105°C construction does not automatically carry an oil-resistant rating. If your application requires oil resistance, the applicable qualified construction, oil condition, and associated marking must be confirmed during quotation. Similarly, the optional 3500 V peak marking referenced in the Style definition applies only to electronic-use tagging and is not the product’s normal continuous voltage rating.
Appliance Internal Wiring Application Scope
UL Style 10269 is designated for internal wiring of appliances. This is the application boundary for the product supplied from this page. It is not intended as building wire, field wiring, branch circuit wiring, a grounding or earth conductor, an outdoor power cable, or a motor feeder cable. This page does not position the product for lightning protection, EMI shielding, battery grounding, or utility/data-center grounding applications.
UL Marking and Documentation Requirements
Qualifying UL AWM Style 10269 constructions can be supplied through the relevant partner manufacturing scope associated with the applicable UL Recognized Component file on record. UL marking and related documentation depend on the specific qualified construction ordered; not every configuration automatically carries a UL Mark, and marking requirements should be confirmed when requesting a quotation. We do not guarantee that a given shipment will pass a customer’s internal or third-party audit, building-code review, or project bidding requirement.
RoHS and REACH are separate regulatory frameworks from UL recognition and are not treated as equivalent certifications on this page. Applicable RoHS / REACH documentation, where required, is confirmed according to the ordered materials and your documentation requirements.
Ordering UL 10269 6 AWG PVC Wire
To provide an accurate quotation for UL 10269 6 AWG PVC wire, please specify:
- Confirmation of 6 AWG as the required gauge
- 105°C requirement (or 80°C / 90°C, if applicable)
- Solid or stranded round conductor
- Required conductor material or finish
- Oil-resistance requirement, if applicable
- Insulation colour
- Order quantity
- Reel, spool, or packaging requirement
- UL marking requirement, if applicable
- Documentation requirements, including RoHS / REACH if needed
- Shipping destination
Send this information and we respond with a quotation within 12 business hours. Production lead time depends on the confirmed construction and order quantity, and shipping options and applicable Incoterms are confirmed during quotation according to destination.
For other gauges or ratings within this Style, see our UL 10269 PVC Wire category, or browse our broader PVC Insulated Wire range to compare constructions.
