UL 3304 14 AWG Silicone Ignition Wire Overview
This page covers UL AWM Style 3304 silicone rubber insulated ignition wire in the 14 AWG conductor size, supplied by CableApex as a factory-direct manufacturer. UL Style 3304 covers a conductor range of 22 AWG through 12 AWG; this page focuses specifically on the 14 AWG construction for buyers sourcing wire for electronic ignition internal wiring in gas ranges and gas or fuel-oil burner systems. Buyers requiring a different gauge within the Style range should confirm their specific size during quotation.
UL 3304 14 AWG silicone ignition wire is a single-conductor construction with extruded silicone rubber insulation and a fiberglass braid covering, built for the high-voltage, high-temperature demands of gas ignition circuits. Conductor construction, insulation and braid colour, and packaging are confirmed according to the ordered specification.
200°C / 10kV AC UL 3304 Construction
| Parameter | UL Style 3304 |
|---|---|
| Construction | Single conductor with extruded insulation |
| Rated Temperature (Maximum) | 200°C |
| Voltage Rating | 10,000 Vac (10kV AC) |
| Flame Rating | Horizontal flame; VW-1 vertical flame test available |
| Conductor Size Range (Style) | 22 AWG – 12 AWG, solid or stranded round |
| Insulation | Extruded SR (silicone rubber), 40 mil min. average / 36 mil min. at any point |
| Covering | Fiberglass braid |
| Marking | General — company name, model designation and UL Recognized Component Mark — file on record |
| Use per UL Style file | Internal wiring of electronic ignition or similar application in gas ranges or gas or fuel-oil burner systems, where protected from damage during handling, installation and servicing of the appliance |
| RoHS / REACH | Confirmed during quotation according to ordered materials and documentation requirements |
14 AWG Product Focus Within the 22–12 AWG Style Range
This page is built specifically around the 14 AWG conductor size within UL Style 3304’s 22–12 AWG range. 14 AWG is used here as a defined gauge-specific purchasing attribute, not a description of the full Style. At this gauge, silicone rubber insulation is applied at the Style’s 40 mil minimum average / 36 mil minimum-at-any-point thickness, with the fiberglass braid covering specified in the Style definition. Buyers looking for a different gauge within the 22–12 AWG range should confirm that specific size during quotation.
Silicone Insulation and Fiberglass Braid Construction
Insulation is extruded silicone rubber (SR), applied to the Style’s minimum thickness requirements of 40 mil average and 36 mil at any point — a substantially heavier wall than standard-voltage AWM silicone constructions, reflecting the 10,000 Vac rating. The Style specifies a fiberglass braid as the outer covering. We do not claim a specific abrasion-cycle count, tensile strength, or flex-life rating for the braid unless separately confirmed by actual construction data. Insulation and braid colour should be specified and confirmed with your order.
Protected Gas Range and Burner Ignition Internal Wiring
UL Style 3304 is designated for internal wiring of electronic ignition or similar applications in gas ranges, or gas or fuel-oil burner systems, where the wire is protected from damage during handling, installation, and servicing of the appliance. This is the application boundary for the product supplied from this page. It is not intended as building wire, field wiring, external power cable, general industrial control cable, motor cable, or for direct contact with a burner flame or heating element.
UL Marking and Documentation Requirements
Qualifying UL AWM Style 3304 constructions can be supplied through the relevant partner manufacturing scope associated with the applicable UL Recognized Component file on record. UL marking and related documentation depend on the specific qualified construction ordered; not every configuration automatically carries a UL Mark, and marking requirements should be confirmed when requesting a quotation. We do not guarantee that a given shipment will pass a customer’s internal or third-party audit, certification review, or regulatory approval.
RoHS and REACH are separate regulatory frameworks from UL recognition and are not treated as equivalent certifications on this page. Applicable RoHS / REACH documentation, where required, is confirmed according to the ordered materials and your documentation requirements.
Ordering UL 3304 14 AWG Ignition Wire
To provide an accurate quotation for UL 3304 14 AWG silicone ignition wire, please specify:
- Confirmation of 14 AWG as the required gauge
- Solid or stranded conductor
- Conductor finish requirement, if applicable
- Insulation and braid colour
- Order quantity
- Reel or packaging requirement
- UL marking requirement, if applicable
- Documentation requirements, including RoHS / REACH if needed
- Application details — gas range, gas burner, or fuel-oil burner system, where relevant
Send this information and we respond with a quotation within 12 business hours. Production lead time depends on the confirmed construction and order quantity, and shipping options and applicable Incoterms are confirmed during quotation according to destination.
For other gauges within this Style, see our UL 3304 High Voltage Ignition Wire category, or browse our broader High Voltage AWM Wire range to compare constructions.
