Wholesale UL 1007 PVC Wire Supply
CableApex is a factory-direct manufacturer supplying UL AWM Style 1007 PVC hook-up wire on a wholesale basis for OEM and appliance production buyers. This page addresses bulk procurement of UL Style 1007 PVC wire: what the Style covers technically, which construction details are confirmed per order, and what information we need from you to issue an accurate quotation. If you already know you need UL Style 1007 and are now evaluating a wholesale supplier, this page is built for that purchasing stage.
Wholesale supply from CableApex means ordering the specific AWG, conductor construction, insulation colour, and packaging your production line requires, rather than being limited to a single fixed configuration. Available gauges, colours, conductor constructions, packaging formats, and order quantities are confirmed during quotation based on current production and material availability.
UL AWM Style 1007 Technical Scope
UL AWM Style 1007 is a single-conductor construction with extruded insulation, defined for internal appliance wiring applications. The table below summarizes the Style-level parameters that apply across the full 1007 range.
| Parameter | UL Style 1007 |
|---|---|
| Construction | Single conductor with extruded insulation |
| Rated Temperature (Maximum) | 80°C |
| Voltage Rating | 300 Vac |
| Flame Rating | Horizontal flame; VW-1 vertical flame test available |
| Conductor Size Range | 32 AWG – 16 AWG, solid or stranded |
| Insulation | Extruded PVC, 15 mil min. average / 13 mil min. at any point |
| Marking | General; tags may indicate 600 V Peak — for electronic use only |
| Use per UL Style file | Internal wiring of appliances |
| RoHS / REACH | Confirmed during quotation according to ordered materials and documentation requirements |
The Style also permits an optional oil-resistant construction under certain conditions, but this is not a default feature of every wire supplied from this page — if your application requires an oil-resistant construction, confirm this specifically when requesting a quotation.
Conductor and Insulation Options by Ordered Construction
Within the 32–16 AWG range, conductors can be supplied solid or stranded, and in bare or tinned copper, depending on the ordered specification — required conductor construction and plating should be confirmed during quotation. We do not present a single fixed conductor type as the default for every configuration; strand count, strand diameter, finished outer diameter, and conductor resistance are order-specific and confirmed against your drawing or specification rather than published as generic figures.
Insulation is extruded PVC applied at the minimum thicknesses shown in the table above. Insulation colour is selected per order to support your circuit-identification scheme. Material composition details, including any lead-free or flame-retardant formulation, should be confirmed separately if required for your specification rather than assumed as a standard feature.
Bulk Purchasing and Packaging Requirements
Wholesale orders are typically defined by AWG size, conductor construction, insulation colour, and total quantity, supplied on reels, spools, or in coil packaging appropriate for the order size and destination. Packaging format, reel length, and labelling requirements are set per order rather than fixed for all wholesale purchases. Available gauges, colours, and packaging options depend on current production scheduling and material stock, and are confirmed at the time of quotation rather than guaranteed as continuously available.
We supply as a factory-direct manufacturer, which allows construction details to be adjusted within the UL Style 1007 scope to match your bill-of-materials rather than substituting a fixed catalog item.
UL Marking and Documentation Boundaries
Qualifying UL AWM Style 1007 constructions can be supplied through the partner manufacturing scope associated with the applicable UL Recognized Component file on record. UL marking and related documentation depend on the specific qualified construction ordered — not every configuration automatically carries a UL Mark, and we do not guarantee that a given shipment will pass a customer’s internal or third-party audit, certification review, or safety inspection. If UL marking is required, confirm this explicitly when requesting a quotation so the correct qualified construction can be supplied.
RoHS and REACH are separate regulatory frameworks from UL recognition and are not treated as equivalent certifications. Applicable RoHS / REACH documentation, where required, is confirmed according to the ordered materials and your documentation requirements rather than stated as a blanket compliance claim covering every product.
Information Needed for an Accurate Quotation
To provide a wholesale quotation, please specify:
- Required AWG size within the 32–16 AWG range
- Solid or stranded conductor
- Conductor construction or plating, if applicable (bare or tinned copper)
- Insulation colour
- Order quantity
- Reel, spool, or coil packaging requirement
- UL marking requirement, if applicable
- Documentation requirements, including RoHS / REACH if needed
- Shipping destination
Send this information and we respond with a quotation within 12 business hours. Production lead time depends on the confirmed construction and order quantity, and shipping options and applicable Incoterms are confirmed during quotation according to destination.
For a specific gauge with published construction data, see our UL 1007 18 AWG Stranded Tinned Copper Hook-up Wire page. For the full range of Style 1007 constructions, browse the UL 1007 Wire category.
